Astounding Oopart?! Russian scientist find or claim to find "120 million year old" (Evol years)3D Aerial Relief Map.
"This seems to be impossible. Scientists of Bashkir State University have found indisputable proofs of an ancient highly developed civilization’s existence. The question is about a great plate found in 1999, with picture of the region done according to an unknown technology. This is a real relief map. Today’s military has almost similar maps.
The map contains civil engineering
works: a system of channels with a length of about 12,000 km, weirs, powerful dams. Not far from the channels, diamond-shaped grounds are shown, whose destination is unknown. The map also contains some inscriptions. Even numerous inscriptions.
At first, the scientists thought that was Old Chinese language. Though, it turned out that the subscriptions were done in a hieroglyphic-syllabic language of unknown origin. The scientists never managed to read it…
“The more I learn the more I understand that I know nothing,” – the doctor of physical and mathematical science, professor of Bashkir State University, Alexandr Chuvyrov admits.
The geological structure of the stab was determined: it consists of three levels. The base is 14 cm thick, made of the firmest dolomite. The second level is probably the most interesting, “made” of diopside glass.
The longer the slab was studied, the more mysteries appeared. On the map, a giant irrigative system could be seen: in addition to the rivers, there are two 500-metre-wide channel systems, 12 dams, 300-500 metres wide, approximately 10 km long and 3 km deep each.
The dams most likely helped in turning water in either side, while to create them over 1 quadrillion cubic metres of earth was shifted.
In comparison with that irrigative system, Volga-Don Channel looks like a scratch on the today’s relief. As a physicist, Alexander Chuvyrov supposes that now mankind can build only a small part of what is pictured on the map. According to the map, initially, Belaya River had an artificial river-bad.
It was difficult to determine even an approximate age of the slab. At first, radiocarbonic analysis was carried out, afterwards levels of stab were scanned with uranium chronometer, though the investigations showed different results and the age of the slab remained unclear.
While examining the stone, two shells were found on its surface. The age of one of them " Navicopsina munitus of Gyrodeidae family - is about 500 million years, while of the second one " Ecculiomphalus princeps of Ecculiomphalinae subfamily - is about 120 million years (mythical evol years).
3000+ Year Old Giant head found buried 20 ft. deep with the use of magnetic mapping.
What was an Advanced, Black, (or possibly Asian)non-Egyptian, pre-Hispanic civilization doing in Mexico--in the America's prior to and more advanced than the Maya and the Aztec's?
No one knows where they came from, where they went or how they moved those huge stone sculptures from distant quarries. Traditional archeology doesn't have the answers--but if you believe that man has always been advanced you can see where they may have come from.
The problem is uniformism again. Materialists want so much to show a steady and inevitable progression from cave man to advancing man but..
Bible believers understand that man began building cities right from the beginning. Man lived in caves as a result of catastrophies like the flood..that's why for example you can find art in the caves of Lascaux technically and artistically on par with art of today --where scaffolding was built to reach the higher walls and why technologically inferior civilizations can be found on top of older civilizations with superior technology--like the Olmecs.
“Readers of my books, and especially of The Lost Realms, as well as of a previous article on this website titled "The Case of the Missing Elephant," know by now that beginning with the discovery of a colossal stone head in 1869, an advanced civilization that preceded the Mayas and Aztecs of Mexico came to light.
Its leaders and bearers were unmistakably black Africans. They were arbitrarily named by archaeologists "Olmecs"; and their embarrassing enigma -- of who they were, and how they had come across the ocean, and why, was compounded by the timing of their arrival in the New World.
Once it was conceded (very grudgingly!) that the 'Olmecs' did indeed represent the earliest or even Mother Civilization of Mesoamerica, the date of their arrival was at first set at about 250 B.C.; then at about 500 B.C.; then farther back and back, until 1500 B.C. was acknowledged.
But I have argued for a date twice as old!” 3000 years is now accepted…..." Sitchin
Extensive quarrying was done near the city of Aixen -Provence, France between 1786 and 1788, to provide the large quantities of limestone needed for the rebuilding of the Palace of Justice.
In the quarry from which the limestone was taken, the rock strata were separated from each other by layers of sand and clay, and by the time the workmen had removed 11 layers of rock they had found they had reached a depth of some 40 feet or 50 feet from the original level of the area.
Beneath the 11th layer of limestone they came to a bed of sand and began to remove it to get at the rock underneath. In the sand they found the stumps of stone pillars and fragments of half worked rock, the same stone and rock that they themselves had been excavating.
They dug further and found coins, the petrified wooden handles of hammers, and pieces of other petrified wooden tools. Finally they came to a large wooden board, seven or eight feet long and an inch thick. As was the case with the wooden tools, it had also been petrified into a form of agate and it had been broken into pieces.
When the pieces were reassembled, the workmen saw before them a quarryman's board of exactly the same kind they themselves used, worn in just the same way as their own boards were, with rounded, edges.
How a stonemason's yard equipped with the kind of tools used in France in the late 18th century, had come to be buried 50 feet deep under layer of sand and limestone 300 million years old is a mystery even more vexing today than at the time of the original discovery.
For we now know, thanks to advances in geological and anthropological dating, that such a thing is absolutely impossible. And yet it does seem to have happened.
(The American Journal of Science and Arts, 1:145-46, 1820)
These ancient objects and more besides present at least a three fold problem. How was this super fine thread created in the first place? How were these superfine holes created through extremely hard precious stones without damaging the stones. How were the jewelers able to see these virtually microscopic threads and holes without a microscope or similar instrument?
These extremely minute bead balls (top)are the remainder of a necklace which is excavated from an Incan ancient tomb which is located in Lima Peru.
The fact that such a minute hole is bored through this brittle shell material of 3 mm thickness is not possible even with infinitesimal workmanship technology of today.
Originally it means that the super superfine thread was passing as many as 6 to the groove. The problem is what method was used to produce that much micro-thin thread? A thinness of 140 counts (the thinness which with 1 g reaches approximately 283 m) is possible with cotton spinning technology of today, but as for this super superfine thread, it reaches at the highest as many as 250 counts.
The first problem was drilling superfine holes in a brittle material without damage--the second object (bottom) presents a different problem: the mummy which is excavated from a Peruvian graveyard.The mystery is the means utilized for boring the superfine holes through emerald.
Diamonds are designated as hardness 10, the emerald is hardness 7. Only the ruby and the sapphire and the diamond of hardness 10 are harder than emerald. Neither the diamond, the ruby or the sapphire were known to the Andean ancient civilizations. Today, high frequency induction heating could be used or a method such as laser beam, but as for the ancient Andean to whom these artifacts are assumed to belong, no means of accomplishing the high tech, microscopic drilling or manufactoring the thread is known.--Translated